Multi-fuel Flexible Flue Liner - 175mm (7")

A double skinned 316 grade stainless steel flexible flue liner, used to reline existing masonry chimneys. Suitable for use with wood, multi-fuel or gas stoves on our site. This product has a 10 year warrenty. Flue liner is non-returnable, so please ensure you order correctly. 

A double skinned 904 grade stainless steel flexible flue liner, used to reline existing masonry chimneys. This grade is recommended if you intend to 'slumber' you stove through the night. Suitable for use with wood, multi-fuel or gas stoves on our site. This product has a 25 year warrenty. Flue liner is non-returnable, so please ensure you order correctly. 

Stainless steel adaptor used to connect rigid stove flue pipe to multi-fuel flexible chimney liner at the bottom of the chimney stack. 

Stainless steel adaptor used to increase the flue diametre and connect rigid stove flue pipe to multi-fuel flexible chimney liner in one component. 

Stainless steel support for multi-fuel flexible chimney liner at the top of the chimney stack. Use above 'closure plate' and preferably 'protection sleeve' for a secure fix. 

A galvanised steel plate which is fitted at the top of the chimney. The multi-fuel flexible chimney liner fits through the closure plate and is then held in place by the 'top clamp'. 

A stainless steel sleeve that fits inside the top of the multi-fuel flexible chimney liner and provides internal support to ensure the 'top clamp' does not crush the liner. 

A stainless steel bracket commonly used near the base of the multi-fuel flexible chimney liner to add additional support and keep the liner away from the wall of the chimney. 

A stainless steel cowl which is connected to the multi-fuel flexible liner at the top of the installation to prevent rain water from entering the flue. 

Manufactured from 316 grade stainless steel, the clay pot adaptor is designed to be fixed to the top of your multi-fuel flexible chimney liner to enable installation without having to remove the clay pot. Includes a 'top clamp' to connect to your liner. 

Manufactured from 316 grade stainless steel, the clay pot adaptor is designed to be fixed to the top of your multi-fuel flexible chimney liner to enable installation without having to remove the clay pot. This model includes a standard cowl. Includes a 'top clamp' to connect to your liner. 

Stainless steel construction with a terracotta finish, the clay pot adaptor is designed to be fixed to the top of your multi-fuel flexible chimney liner to enable installation without having to remove the clay pot. This model includes an anti-down draught cowl. Includes a 'top clamp' to connect to your liner and an outer strap to secure to your chimney pot. 

The aluminium chimney data plate includes all the information required by Building Regulations Approved Document J for certification of chimney and fireplace work. Details of the specific installation can easily be added on-site using any indelible pen. 

Micafil can be used to back fill the cavity between the chimney liner and the chimney stack, providing additional insulation and reducing heat loss. When mixed, Micafil concrete is ideal behind firebacks and around pipes when fitting heaters.