Register & Spigot Plates

Used to connect the flue pipe from a stove to the bottom of an existing chimney. The flat plate which measures 355mm (14") should be fixed to the bottom of your chimney leaving the 'spout' facing downwards ready for the flue pipe to slide over. 

Made from non-corrosive galvanised steel, this register plate can be used to seal off the bottom of your chimney when installing a stove. An appropriately sized hole will need to be cut in the plate using a grinder or similar tool to allow the flue pipe to pass through into the chimney above. Size 1000mm x 500mm x 1.5mm. 

This heat proof board is ideal for use as a register plate when sealing off the bottom of your chimney. It can be cut easily using a standard wood saw. Size 900mm x 600mm x 10mm.