Esse 301 Inset Multi Fuel SE Stove
The Esse 301SE fits straight into a standard fireplace, improving the efficiency of an open fire by up to 400% and can be used in a smoke control zone.
The Esse 301SE offers the best of both the 300 and 350. It fits straight into a standard fireplace but boasts a 5kw output. It is also equipped with a secondary air control for burning wood and smokeless fuel.
The Esse 301SE inset convector stoves provides a unique solution to convert an inefficient open fire into an economical multi-fuel stove, improving the efficiency of an open fire by up to 400% and is suitable for overnight burning. No flue pipe is required as it is designed to ‘plug in’ to a standard fireplace opening with no messy and expensive alteration.
This model has the SE stamp, which relates to a smoke exempt appliance, therefore can be used in smoke control areas.
The dimension on the smaller picture above relate to the fireplace opening required.
A) To suit openings between 400 & 460mm wide.
B) To suit openings between 540 & 560mm high.
C) At least 50mm flat fixing area required around fireplace opening.
D) The hearth must be at least 400mm deep.
Features and specification :
* Suitable for continuous burning
* Operating range (depending on fuel type and settings) up to 5kW/h
* Pre-heated secondary airwash
* Afterburn system for outstanding flame and heat control
* Cast iron construction
* Class1 chimney outlet
* Additional room vents are not normally required
|Flue Centre Floor to Rear||N/A|
|Back to Centre of Top Flue||N/A|
|Direct Air Kit Compatible||No|
|Air Vent Required||No|
|Suitable for 12mm Hearth||N/A|